Skip to content

Getting Started

Welcome to the Steering Assist App! This guide will help you install the app, connect it to your steering assist module, and get started right away.

1. System Requirements

To use the Steering Assist App, you need the following:

  • iOS: version 12.0 or higher
  • Android: version 8.0 or higher
  • Bluetooth functionality on your device

2. Download and Install

Download the app via the links below:

  • App name: Neotex (Stuurhulpmodule)
  • Developer: Apetail B.V.
  • Price: Free

3. Open App and Permissions

After installing the app:

  1. Open the Steering Assist App
  2. Set your preferred language, which can also be adjusted in settings later

4. Connect to the Steering Assist Module

Preparation

  • Turn on the ignition so the module has power
  • Wait for the status LED to turn green. This may take 15 seconds
  • Make sure you are within approximately 5 meters of the vehicle

Connect within 10 minutes

It is important to connect within 10 minutes of turning on the module. After this time, the module returns to sleep mode to save energy. Once you have connected, the Bluetooth connection remains active until you manually disconnect or the module is turned off.

Making the Connection

  1. Open the app and tap "Add Device" or "Bluetooth" in the bottom menu
  2. Grant permission for Bluetooth usage
  3. Grant permission for location services (required for Bluetooth scanning)
  4. Wait for the connection to be established
  5. The device is now added to your vehicles
  6. (Optional) Give the vehicle a recognizable name by tapping the model name in the dashboard

Why location permission?

Android requires location permission to scan for Bluetooth devices. The app does not use your location for any other purposes.

  1. Open the app and go to "My Vehicles"
  2. Select your vehicle from the list
  3. Tap "Connect"
  4. Wait for the connection to be established

Connection problems?

If your vehicle has been added before, you can only reconnect via "My Vehicles". This means that using the "Bluetooth" button in the bottom menu will not work for reconnecting.

It is possible to manage multiple vehicles in the app. Follow these steps to add a new vehicle:

  1. Open the app and go to "My Vehicles"
  2. Tap the "+" icon or "Bluetooth" in the bottom menu to add a new vehicle

5. Explore the App

Dashboard

The dashboard is the starting point of the app after connecting to your vehicle. Here you'll find an overview of the main functions.

Firmware

Shows the current firmware version of the steering assist module and indicates if an update is available. Go to Vehicle Update for more information about updating the firmware.

Settings

Here you can adjust various settings that affect the behavior of the steering assist. Go to Settings for a detailed explanation of all available options.

Calibrate Steering Angle

Start the calibration process for the module's steering angle sensor. Go to Steering Angle Calibration for step-by-step instructions.

Live View

Displays real-time data from the steering assist module, such as steering angle, speed, and position in the row.

Next Steps

Now that you have installed and connected the app, you can continue with:

Problems?

Having issues? Check the Support page for help.